Skip to content

BIOS Firmware

Standard BIOS

LP-BS-7-S70JR120-CN51G-E

  • Version: CN51G-E
  • Update Time: 2023/05/22
  • Size: 8MB
  • Update Information:
    • Remove the fixed startup sequence to solve the boot loop issue for Ubuntu
    • add the Serial Port Console Redirection
  • Checksum 3BB1
  • Download
Legacy Version

LP-BS-7-S70JR120-CN51G-D

  • Version: CN51G-D
  • Size: 8MB
  • Update Time: 2022/08/15
  • Update Information:
    • Fix the issue that NVME SSD works abnormally when booting after power failure
    • Modify the frequency of eMMC to default to HS400
    • Secure boot is turned off by default
    • Add the patch that Windows Boot Manager can not boot
    • Modify the USB3 Port2 mode to USB 3.1 Gen2
    • Change the reading method of the MAC address
    • Add Windows Recovery function, shortcut key F9
    • Checksum´╝Ü38B2
  • Download

Optional BIOS

1. PCIe x1 Support in M.2 B key slot

LP-BS-7-S70JR120-CN51G-E_ON_PCIE

Based on the S70JR120-CN51G-E BIOS version, this changes the SATA III lane in M.2 B Key to the PCIe x1 lane . So if you want to use the PCIe signal in M.2 B key slot, please reflash your board with this BIOS firmware.

  • Version: CN51G-E_ON_PCIE
  • Update Time: 2023/05/22
  • Size: 8MB
  • Update Information:
    • Change the SATA III lane in M.2 B Key to the PCIe x1 lane
  • Checksum 3BB1
  • Download
Legacy Version

LP-BS-7-S70JR120-CN51G-D-ON_PCIE Based on the S70JR120-CN51G-D BIOS version, this changes the SATA III lane in M.2 B Key to the PCIe x1 lane . So if you want to use the PCIe signal in M.2 B key slot, please reflash your board with this BIOS firmware.

  • Version: CN51G-D-ON_PCIE
  • Size: 8MB
  • Update Time: 2022/11/02
  • Update Information:
    • Change the SATA III lane in M.2 B Key to the PCIe x1 lane
  • Checksu: CF92
  • Download

2. Voltage Control for eDP Interface RST Pin

LP-BS-7-S70JR120-CN51G-E-T

Based on the S70JR120-CN51G-E BIOS version, this adds the voltage control of the RST pin of the eDP interface. If your eDP screen displays monochrome in a cycle, please reflash your board with this BIOS firmware.

  • Version: CN51G-E-T
  • Update Time: 2023/05/18
  • Size: 8MB
  • Update Information:
    • Add: Advanced->Power Management-> Add GPP_D6 Output Level
  • Download

Update the BIOS Firmware

Please refer to the Update BIOS Firmware section for detailed guide.